The main process of biodegradable disposable tableware production is:
According to the order requirements, it is made by mixing sugar cane pulp and bamboo pulp according to the proportion, and the mixing ratio of sugar cane pulp and bamboo pulp varies according to the customer’s requirements. The mixing ratio of sugar cane pulp and bamboo pulp varies according to the customer’s requirements. Firstly, the cane pulp and bamboo pulp are put into the hydraulic pulper in different proportions and soaked for about 5 minutes, then the hydraulic pulper is started for pulping. The diluted pulp is put into the pulp pool, and the oil-proof agent and water-proof agent are added in the process of dilution, and the agitator of the pulp pool mixes the pulp evenly.
The pulp in the pulp supply tank is pumped through the pulp supply pipeline to the forming machine of the disposable environmental protection paper mold automatic production line, where the water in the pulp is removed by vacuum suction and filtration, so that the fibers in the pulp are adsorbed on the forming screen to form a wet embryo. Under the temperature of 230 and pressure of 15 tons, the wet embryo is squeezed out of the water and dried to form semi-finished products. After shaping, the semi-finished products are transferred to the trimming post, where the excess trim is removed by the trimming machine with a cutting knife.
After cutting the edge, the products are transferred to the inspection process, where the inspectors inspect the products according to the customer’s standards and pick out those that do not meet the customer’s requirements, and those that meet the requirements are transferred to the disinfection and packaging process, where the products are disinfected by the ultraviolet disinfection machine.
